Victron Phoenix 24/500 VE.Direct Schuko* – 24V Inverter Καθαρού Ημιτόνου 400W για Φωτοβολταϊκά

Victron ECOMulti

This is a compact, single box solution which contains a 3kva inverter and 2.3kwh lithium Ion battery. This contains a 50A transfer relay and connects inline between your grid suppy and your PV inverter + protected loads.

The main advantage of this is its simple installation and simple operation. However while compact and easy to install…there are no limits in its functionality.

Its main operation is to charge its internal battery from surplus power from the PV system during the day. At night, the ECOMulti disconnects from the grid and runs from battery. If the power requirements is too high, or the battery runs low, then it reconnects to the grid.

Τιμή χωρίς ΦΠΑ

Ο Quattro μπορεί να συνδεθεί σε δύο ανεξάρτητες πηγές τροφοδοσίας AC, για παράδειγμα σε επίγεια πηγή ισχύος και σε μια γεννήτρια, ή σε δύο γεννήτριες. Το Quattro συνδέεται αυτόματα στην ενεργή πηγή τροφοδοσίας. Ο Quattro αποτρέπει την υπερφόρτωση μιας πηγής με περιορισμένη τάση AC. Πρώτα, η φόρτιση της μπαταρίας μειώνεται αυτόματα όταν ενδέχεται να υπάρξει υπερφόρτωση. Το δεύτερο επίπεδο αυξάνει την ισχύ μιας γεννήτριας ή τη δευτερεύουσα παροχή από επίγεια πηγή με ισχύ που προέρχεται από την μπαταρία.

Τιμή χωρίς ΦΠΑ

Combined with the flexibility of a MultiPlus bidirectional converter
The MultiPlus range of bidirectional converters is the worldwide product of choice on boats and vehicles to generate AC power, and to recharge batteries, either with shore power or an onboard AC generator.
The MultiPlus also is the industry standard in on-grid and off-grid energy storage systems and is approved for use in energy storage and self-consumption systems in the UK (G83/2 and G59-3-1 standards).

Several hardware and firmware modifications were needed to qualify for VDE-AR-N 4105 and other country specific energy storage related standards.
The resulting product is the MultiGrid.

The MultiGrid fits seamlessly in all common energy storage topologies
There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local conditions and regulations.
The MultiGrid hardware, together with a wide range of software tools, seamlessly fits in all common topologies.

Τιμή χωρίς ΦΠΑ

VDE-AR-N 4105 and AS/NZS 4777.2 approval (other country specific approvals will follow soon) Combined with the flexibility of a MultiPlus bidirectional converter The MultiPlus range of bidirectional converters is the worldwide product of choice on boats and vehicles to generate AC power, and to recharge batteries, either with shore power or an onboard AC generator. The MultiPlus also is the industry standard in on-grid and off-grid energy storage systems and is approved for use in energy storage and self-consumption systems in the UK (G83/2 and G59-3-1 standards).

Several hardware and firmware modifications were needed to qualify for VDE-AR-N 4105 and several other country specific energy storage related standards. The resulting product is the MultiGrid. The MultiGrid fits seamlessly in all common energy storage topologies There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local conditions and regulations. The MultiGrid hardware, together with a wide range of software tools, seamlessly fits in all common topologies,shown in the pictures below. More detail can be found in our Energy Storage brochure.

Τιμή χωρίς ΦΠΑ